NEW! Upgraded retract strut pins with 6.5mm pin diameter
NEW! Decal set now comes pre-applied
Model officially licensed by Northrop Grumman
Grass capable landing gear with 5mm thick steel pin and metal trunion
All new rotating main retract unit
Metal suspension main struts with sequenced main gear doors
Retractable tail wheel with scale detailing
Scale four panel split flaps with rounded leading edge like the full scale
Multi-material wing incorporates foam, plywood ribs, carbon spars, and aluminum joints for optimum strength
DayBright LED wingtip lights and sequenced landing light
9g-17g digital hybrid servos, brass ball links, and nylon hinges on all control surfaces
Large 18x12 (90% scale) diameter propeller with aluminum alignment and reinforcement plates
Integrated ballast chamber concealed within the plastic cowl
F4U-1A ("Birdcage" canopy) and F4U-1D ("Bubble" canopy) PNPs available in different paint schemes
Each version contains two decal sets
Admiral 6S 5000 provides 5-9 minutes average flight duration with throttle management

Includes:
FlightLine F4U-1A Corsair "Birdcage" 1600mm (63") Wingspan - PNP
Motor, ESC with reverse thrust, servos, LED lights and retracts pre-installed

Requires:
6 Channel radio 
6 Channel receiver 
6 Cell 22.2V 4000 - 6000 mAh LiPo Battery with EC5 connector 
6 Cell compatible battery charger